Canon iR105 Service Manual page 631

SERVICE MODE
COPIER>ADJUST>CST-ADJ
<CST-ADJ>
Use it to make cassette/manual feed-related adjustments.
If you have replaced the DC controller PCB or cleared the RAM on the DC controller
PCB, be sure to enter the values indicated on the service sheet.
C3-STMTR
Use it to enter a paper width basic value for the cassette 3. (STMTR)
Range of
adjustment 0 to 255
C3-A4R
Use it to enter a paper width basic value for the cassette 3. (A4R)
Range of
adjustment 0 to 255
C4-STMTR
Use it to enter a paper width basic value for the cassette 4. (STMTR)
Range of
adjustment 0 to 255
C4-A4R
Use it to enter a paper width basic value for the cassette 4. (A4R)
Range of
adjustment 0 to 255
MF-A4R
Use it to enter a paper basic value for the manual feed tray. (A4R)
Range of
adjustment 0 to 255
S-70
If you have replaced the paper width detecting VR, execute the fol-
lowing service mode: FUNCTION>CST.
If you have replaced the paper width detecting VR, execute the fol-
lowing in service mode: FUNCTION>CST.
If you have replaced the paper width detecting VR, execute the fol-
lowing in service mode: FUNCTION>CST.
If you have replaced the paper width detection VR, execute the fol-
lowing in service mode: FUNCTION>CST.
If you have replaced the paper width detecting VR, execute the fol-
lowing in service mode: FUNCTION>CST.
COPYRIGHT© 2001 CANON INC. 2000 2000 2000 2000 CANON iR105 REV.0 JULY 2001