E067 - Canon iR105 Service Manual

4.1.19 E067

Mounting
1) Are the primary charging assembly, pre-transfer charging assem-
NO:
Connection
2) Are the following connectors on the HV-DC PCB and the screws
NO:
Wiring
3) Is the wiring from the HV-DC PCB to each charging assembly and
NO:
HV-AC PCB, HV-DC PCB
4) Disconnect the connector J722 of the HV-DC PCB, and execute
NO:
YES: Replace the HV-DC PCB, and connect the connector J722.
COPYRIGHT© 2001 CANON INC.
bly, and transfer/separation charging assembly mounted firmly?
Mount them firmly.
connected and tightened firmly? (See F05-401-02.)
• J721
• J723
• J730
Connect or tighten firmly.
the wiring from the HV-AC PCB to each charging assembly nor-
mal?
Corrected the wiring.
copying. Is E067 indicated?
Replace the HV-AC PCB, and connector the connector J722.
J730
J721 J722 J723
2000 2000 2000 2000
CHAPTER 6 TROUBLESHOOTING
F06-401-02
CANON iR105 REV.0 JULY 2001
6-97