Canon iR105 Service Manual page 711

ERROR CODE
E583
Main cause The tray sub plate motor (M6) is faulty. The tray retraction sensor (PI11) is
faulty.
Condition
0001 The tray sub plate retraction sensor does not go ON a specific pe-
0002 The tray sub plate retract sensor does not go OFF a specific period
E584
Main cause The paddle motor (for driving the shutter; M9) is faulty. The shutter home
position sensor (PI12) is faulty.
Condition
0001 The shutter does not return to home position when the paddle mo-
0002 The shutter does not leave home position when the paddle motor is
E590
Main cause The punch home position sensor (PI24) is faulty. The punch 2/3-home sheet
sensor (PI33) is faulty. The punch motor clock sensors (PI34) is faulty. The
punch motor (M18) is faulty. The punch driver PCB is faulty.
Condition
0001 The puncher does not return to home position when the punch mo-
0002 The puncher does not leave home position when the punch motor
0003 The braking start position of the punch motor is faulty.
0004 The puncher is not at home position at the time of a 5-hole sheet
E-20
riod of time after the tray sub plate motor is driven.
of time after the tray sub plate motor is driven.
tor is driven for 1 sec or more.
driven for 1 sec or more.
tor is driven for a specific period of time.
is driven for a specific period of time.
switch-over (2/3-hole sheet puncher only).
COPYRIGHT© 2001 CANON INC. 2000 2000 2000 2000 CANON iR105 REV.0 JULY 2001