Canon iR105 Service Manual page 462

CHAPTER 6 TROUBLESHOOTING
Multifeeder pickup latch solenoid (SL6)
7) Execute the following in service mode. Does the multifeeder pickup
NO:
DC controller PCB
8) Try replacing the DC controller PCB. Is the problem corrected?
YES: End.
6-130
roller move up and down?
COPIER>FUNCTION>PART-CHK>SL5 (up)
COPIER>FUNCTION>PART-CHK>SL6 (down)
COPIER>FUNCTION>PART-CHK>LS-ON
Check the wiring and the like; if normal, replace the solenoid
(SL6). (DC controller PCB J510-10-, -11, -12)
COPYRIGHT© 2001 CANON INC.
↓ ↓ ↓ ↓ ↓
|OK|
↓ ↓ ↓ ↓ ↓
↓ ↓ ↓ ↓ ↓
|OK|
2000 2000 2000 2000 CANON iR105 REV.0 JULY 2001