Canon iR105 Service Manual page 79

4) Disconnect the connector [1] (1 pc.
each), and detach the original size sen-
sor 3/4 [2].
c. Removing the Scanner Home Position Sensor
1) Remove the transformer unit. (See
2.9.3.c.)
2) Free the harness from the wire saddle
[1]; then, disconnect the connector [2],
remove the screw [3], and detach the
sensor mounting plate [4].
COPYRIGHT© 2001 CANON INC. 2000 2000 2000 2000 CANON iR105 REV.0 JULY 2001
CHAPTER 2 NEW FUNCTIONS
[2]
F02-209-37
[4] [3]
F02-209-38
[1]
[1] [2]
2-31