Canon iR105 Service Manual page 663

SERVICE MODE
COPIER>OPTION>USER
MF-LG-ST
Use it to display the Extra Length key for paper up to 630 mm in manual
feed, or up to 630 mm in ADF feed.
Setting 0: normal mode (default)
1: extra length mode (display key)
SPECK-DP
Use it to enable/disable the warning for the result of dust detection for
stream reading.
Setting 0: disable
1: enable (default)
CNT-DISP
Use it to enable/disable the indication of the serial number in response to a
press on the Counter Check key.
Setting 0: enable (default)
1: disable
PH-D-SEL
Use it to see the number of lines in photo mode printing.
Setting 0: 141 lines (default)
1: 134 lines
COPY-JOB
Use it to disable copy job auto start when a card reader and the coin robot is
used.
Setting 0: enable copy job auto start (default)
1: disable copy job auto start
NW-SCAN
Use it to enable/disable the network scan function.
Memo
Setting 0: disable (default)
1: enable
INS-C/S
Use it to expand the inserter function.
Setting 0: cover mode (default)
1: Not used (for future expansion)
TBIC-RNK
Use it to reduce uneven density occurring at specific intervals.
Setting 1 to 5 (default: 2)
S-102
• You cannot make a change in the 100V model.
• You can make a change in the 208/230V model; however, for the
PS/PCL model, it is fixed to '1'.
COPYRIGHT© 2001 CANON INC. 2000 2000 2000 2000 CANON iR105 REV.0 JULY 2001