Canon iR105 Service Manual page 272

No.
Slide out the fixing/feeding unit [1] to the
front.
3 Remove the tag [1] and tape [2] from the
fixing/feeding assembly.
Remove the separation releasing member
[3].
Remove all foreign matter
(e.g., tape glue) from the
feed belt.
4 Remove the tape used to keep the tag in
place; then, open the fixing/feeding unit
top [1], and remove the two screws [2]
from the front and the rear (fixing nip
release).
Close the fixing/feeding unit top [1].
COPYRIGHT© 2001 CANON INC.
Work
2000 2000 2000 2000 CANON iR105 REV.0 JULY 2001
CHAPTER 4 INSTALLATION
Checks/remarks
[1]
F04-204-03
[2]
[3]
[1]
F04-204-04
[2]
[1]
F04-204-05
4-13