Scanner Drive Assembly - Canon iR105 Service Manual

2.9.2 Scanner Drive Assembly

a. Removing the Scanner Motor
1) Remove the ADF.
2) Remove the upper right cover. (See
8.4.2.a.)
3) Remove the rear cover. (See 8.4.1.e.)
4) Remove the upper cover. (2 screws)
5) Remove the harness band [1].
6) Remove the 2 screws [2], and detach the
rear over support plate [3].
7) Remove the right pocket plate. (3
screws)
8) Lift the upper rear cover [1], and re-
move the 2 screws [2]; then, detach the
DF connector unit [3].
9) Disconnect the connector [1], and free
the harness from the 2 edge saddles [2].
10) Remove the 3 screws [3], and detach the
scanner motor [4].
When mounting it, be sure to
set the tension to 10 ±2 N (1
REF.
±0.2 kgf) using a spring gauge
for correct positioning.
COPYRIGHT© 2001 CANON INC. 2000 2000 2000 2000 CANON iR105 REV.0 JULY 2001
CHAPTER 2 NEW FUNCTIONS
[1] [2]
F02-209-10
[1]
F02-209-11
[3]
[4]
F02-209-12
[3]
[2]
[3]
[2]
[2]
[1]
2-17