Canon iR105 Service Manual page 66

CHAPTER 2 NEW FUNCTIONS
b. Scanner Drive Cable
b-1 Adjusting the Tension of the Scanner Drive Cable
When attaching the scanner cable, be sure
to keep a mirror positioning tool (FY9-
3040) on hand.
1) Remove the ADF.
2) Remove the copyboard glass. (see
2.9.1.a.)
3) Remove the upper front cover unit. (Se
8.4.1.g.)
4) Remove the inverter unit. (See 2.9.3.b.)
5) Move the No. 1 mirror case where the
cable fixing [1] of the base is visible
from the opening in the side plate of the
machine.
When moving the mirror base,
be sure not to touch the mirror
or the lamp or impose force to
avoid dirt and damage.
2-18
COPYRIGHT© 2001 CANON INC.
[1]
F02-209-13
[1]
Rear
F02-209-14
2000 2000 2000 2000 CANON iR105 REV.0 JULY 2001