Canon iR105 Service Manual page 225

4) Remove the 2 screws [1], and discon-
nect the 2 connectors [2]; then, detach
the pixel/line conversion PCB [3] to-
gether with the mounting base.
5) Remove the 6 screws [1], and detach the
pixel/line conversion PCB [2] from the
mounting base.
e. Removing the Main Controller PCB
1) Remove the system connector cover.
2) Remove the differential PCB (8.4.6.c).
3) Remove the pixel/line conversion PCB
(8.4.6).
4) Disconnect all connectors from the
main controller PCB [1].
5) Disconnect the connector [2].
COPYRIGHT© 2001 CANON INC. 2000 2000 2000 2000 CANON iR105 REV.0 JULY 2001
CHAPTER 2 NEW FUNCTIONS
[2]
[1]
[3]
[2]
F02-804-83
[1]
[2]
[1]
F02-804-84
[1]
[2]
F02-804-85
[1]
2-177