Scanner Drive Assembly; Removing The Scanner Motor - Canon GP605 Service Manual

CHAPTER 3 ORIGINAL EXPOSURE SYSTEM
B.

Scanner Drive Assembly

1.

Removing the Scanner Motor

1) Open the toner cartridge cover.
2) Remove the upper right cover.
3) Remove the rear cover.
4) Remove the four screws [1], and discon-
nect the connector [2].
5) While pulling the scanner motor unit [3]
toward the front, detach the belt to detach
the motor.
Adjustment:
When the position of the scanner motor
must be adjusted while mounting it, ad-
just the tension of the belt to 13±2N
(1.3±0.2 kgf) using a spring gauge.
3-20
COPYRIGHT © 1999 CANON INC.
[1]
[1]
Figure 3-B501
Figure 3-B502
CANON GP605/605V REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[2]
[3]