Drive Assembly; Scanner Drive Assembly; Iii. Drive Assembly - Canon GP215 Service Manual

4. MECHANICAL SYSTEM

III. DRIVE ASSEMBLY

A. Scanner Drive Assembly
1. Removing the Scanner Drive
Motor
1) Remove the four screws, and remove the rear
cover.
2) Remove the three screws, and remove the fly-
wheel.
3) Remove the four screws w and the spring e;
then, remove the scanner drive motor q.
1
2
Figure 4-301
4–8
COPYRIGHT © 1996 CANON INC.
2
3
CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
2. Removing the Scanner Cable
1) Remove the following:
• Copyboard glass
• Control panel
• Rear cover, upper rear cover, right cover,
left cover
2) Remove the metal fixings q (front, rear) of
the scanner cable.
Figure 4-302
3) Remove the two screws e, and release the
cable spring stay w (front, rear).
2
Figure 4-303
1
3