Separation Claw/Separation Claw Drive Assembly; Removing From The Drum Unit - Canon iR5000i Service Manual

CHAPTER 4 IMAGE FORMATION SYSTEM

7.12 Separation Claw/Separation Claw Drive Assembly

7.12.1 Removing from the Drum Unit

1) Remove the process unit from the ma-
chine. (See p. 4-54P.)
1.Take care not to break the
separation claw.
2.Take care not to damage the
photosensitive drum.
2) Remove the screw [1], and detach the
cover [2].
3) Remove the two screws [3], and detach
the claw holder [4].
4-84 P
COPYRIGHT © 2001 CANON INC.
[2]
F04-712-01
2000 2000 2000 2000 CANON iR5000i/iR6000i REV.0 JUNE 2001
[1]
[3]
[4]