Show Power Inline - Cisco Catalyst 3560X-24P Command Reference Manual

Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands

show power inline

Use the show power inline user EXEC command to display the Power over Ethernet (PoE) status for the
specified PoE port, the specified stack member, or for all PoE ports in the switch stack.
Syntax Description interface-id
consumption
module switch-number
police
priority
| begin
| exclude
| include
expression
Command Modes
User EXEC
Command History Release
12.2(53)SE2
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
OL-21522-02
show power inline [interface-id | consumption | module switch-number] [police] [priority] [ |
{begin | exclude | include} expression]
(Optional) Display PoE-related power management information for the
specified interface.
(Optional) Display the power allocated to devices connected to PoE ports.
(Optional) Limit the display to ports on the specified stack member. The
switch number is 1 to 9.
This keyword is supported only on stacking-capable switches.
(Optional) Display the power policing information about real-time power
consumption.
(Optional) Display the power inline port priority for each port.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Catalyst 3750-X and 3560-X Switch Command Reference
show power inline
2-737