Show Power Inline Police - Cisco Catalyst 4500 Series Command Reference Manual

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches

show power inline police

To display PoE policing and monitoring status, use the show power inline police command.
Syntax Description
interfacename
module n
Defaults This command has no default settings.
Command Modes Privileged EXEC mode
Command History Release
12.2(50)SG
Usage Guidelines
The Oper Power field displays the true power consumption of the connected device.
The show power inline police command with no keywords displays PoE policing status for all interfaces
in the chassis.
If this command is executed at the global level, the last line of the output under Oper Power field displays
the total true inline power consumption of all devices connected to the switch.
Examples
This example shows how to display PoE policing status for a interface GigabitEthernet 2/1:
Switch# show power inline police gigabitEthernet 2/1
Available:421(w)
Interface Admin
--------- ------ ---------- ---------- ---------- ------ -----
Gi2/1
Related Commands Command
power inline police
OL-25342 -01
show power inline police [interfacename] [module n]
(optional) Displays PoE policing and monitoring status for a particular interface.
(optional) Display PoE policing and monitoring status for all interfaces on this
module.
Modification
Support for this command was introduced on the Catalyst 4500 series
switch.
Used:44(w)
Oper
State State
auto on
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0SG and IOS 15.1(1)SG)
Remaining:377(w)
Admin Oper Cutoff Oper
Police Police Power
errdisable ok 22.6
Description
Configures PoE policing on a particular interface.
show power inline police
Power
9.6
2-859