Show Power Inline - Cisco Catalyst 3550 Command Reference Manual

Chapter 2 Cisco IOS Commands

show power inline

Use the show power inline user EXEC command to display the inline power state for a specific Fast
Ethernet interface or for all Fast Ethernet interfaces on the Catalyst 3550-24PWR switch.
Note This command is available only on the Catalyst 3550-24PWR switches.
Syntax Description
interface-id
| begin
| exclude
| include
expression
Command Modes
User EXEC
Command History Release
12.1(12c)EA1
12.1(19)EA1
Usage Guidelines The switch supports full IEEE power on all ports.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show power inline command:
Switch> show power inline
Interface
---------- ----- ---------- ------- -------------------
Fa0/1
Fa0/2
Fa0/3
Fa0/4
Fa0/5
Fa0/6
Fa0/7
Fa0/8
Fa0/9
Fa0/10
<output truncated>
78-11195-09
show power inline [interface-id] | {begin | exclude | include} expression]
(Optional) ID of the interface.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was first introduced.
The Class field was added to the output.
Admin Oper
auto off
auto off
auto on
auto off
auto on
auto off
auto off
auto off
auto off
auto off
Power Device
(Watts)
0.0 n/a
0.0 n/a
15.0 Ieee device
0.0 n/a
5.0 Cisco IP Phone 7960
0.0 n/a
0.0 n/a
0.0 n/a
0.0 n/a
0.0 n/a
Catalyst 3550 Multilayer Switch Command Reference
show power inline
Class
----------
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
2-351