Setting The Paper Tray Priority; Setting The Tray 5 (Bypass) Paper Size Defaults - Xerox 770 Digital Color Press System Administration Manual

7. Select Save.
The Paper Tray Settings screen displays.
8. Select Close.
The main Tools tab screen is displayed.
9. Exit administrator mode.

Setting the Paper Tray Priority

1. Login as administrator.
2. Access the Tools tab on the UI.
3. Select System Settings > Common Service Settings.
4. Select Paper Tray Settings.
5. Select Paper Tray Priority.
6. Select a priority setting and assign a specific tray to that priority setting.
NOTE
Only one tray may be set to each priority.
7. Repeat the previous step until all available trays are assigned to priority settings.
8. Select Save.
The Paper Tray Settings screen displays.
9. Select Close.
The main Tools tab screen is displayed.
10. Exit administrator mode.

Setting the Tray 5 (Bypass) Paper Size Defaults

1. Login as administrator.
2. Access the Tools tab on the UI.
3. Select System Settings > Common Service Settings.
4. Select Paper Tray Settings.
5. Select Tray 5 Paper Size Defaults.
The Tray 5 Paper Size Defaults screen is displayed.
6. Select one of the paper size items.
7. Select Change Settings.
The paper size screen is displayed.
8. Select one of the paper series choices. If selecting Custom, set the numeric values
by using the arrow buttons.
9. Select Save.
The Tray 5 Paper Size Defaults screen is displayed.
10. If desired, select another paper size item and repeat the previous steps.
11. When finished, select Close.
The Paper Tray Settings screen displays.
12. Select Close.
The main Tools tab screen is displayed.
®
Xerox 770 Digital Color Press
System Administration Guide
System Settings > Common Service Settings
2-21