Direct, Multi-Track And N-1 Output Parameters - Studer Vista 9 Operating Instructions Manual

Vista 9 Digital Mixing System
3.3.3 Direct, multi-Track and n–1 output Parameters
DIR oUT on/off Direct output on/off.
DIR oUT Rotary Direct output level, MUTE (i.e. –∞ dB) to +10 dB.
Pan on/off Allows panning of the channel's output signal to the multi-track bus if set to
n–1 oUT on/off N–1 Output on/off.
n–1 oUT Rotary N–1 Output level, MUTE (i.e. –∞ dB) to +10 dB.
n–1 senD Rotary Send level ('contribution') of this channel to all assigned N–1 buses (default:
3-0 Parameters
Press GLOBAL VIEW: OUT n-1.
This view allows controlling the level of the Direct, Multi-Track and the
channel's contribution ('send') to the N–1 bus(es). If the channel is assigned
as a bus owner of an N–1 bus, the N–1 bus outputs is controlled from here as
well.
From surround input channels, N–1 mono buses are fed with an ITU-compat-
ible mono down-mix of the surround signal. N–1 stereo buses are fed accord-
ingly with an ITU-compatible stereo down-mix.
Mtrk Multi-track output level, MUTE (i.e. –∞ dB) to +10 dB.
'Pan On', in addition to the standard channel pan. The panning is adjusted
with the usual Pan controls.
0 dB).
SW V4.5 Date printed: 27.0.0