Master Panel - Studer Vista 9 Operating Instructions Manual

5.21.5

master Panel

To­uch Ho­ld Faders/Enco­ders:
To­uch Reco­rd Faders/Enco­ders:
Date printed: 28.0.0
This option page allows you to over-ride certain settings of the system that
are normally controlled by the AutoTouch+ Panel. This allows for the Au-
toTouch+ Panel to control functions for certain types of controls while al-
lowing other types of controls to remain in specific modes or be blocked by
them.
<Follows Panel>: Faders and Encoders (knobs) will follow the settings of the
AutoTouch+ panel in regards to Touch Hold.
<On>: Faders and Encoders (knobs) will always be in Touch Hold mode
regardless of the settings of the AutoTouch+ Panel.
<Off>: Faders and Encoders (knobs) will never be in Touch Hold mode re-
gardless of the settings of the AutoTouch+ Panel.
Switches:
<Follows Panel>: Switches (keys) and Selectors (keys or knobs) will follow
the settings of the AutoTouch+ panel in regards to Touch Hold.
<On>: Switches (keys) and Selectors (keys or knobs) will always be in Touch
Hold mode regardless of the settings of the AutoTouch+ Panel.
<Off>: Switches (keys) and Selectors (keys or knobs) will never be in Touch
Hold mode regardless of the settings of the AutoTouch+ Panel.
<Follows Panel>: Faders and Encoders (knobs) will follow the settings of the
AutoTouch+ panel in regards to Touch Record.
<On>: Faders and Encoders (knobs) will always be in Touch Hold mode
regardless of the settings of the AutoTouch+ Panel.
SW V4.5
Vista 9 Digital Mixing System
AutoTouch+ 5-5