Eq Parameters - Studer Vista 9 Operating Instructions Manual

Vista 9 Digital Mixing System
3.3.9

EQ Parameters

hI / hM / LM / Lo on/off On/off function for the selected EQ band.
hI / hM / LM / Lo GaIn Rotary Boost/cut adjustment; ±18 dB in steps of 0.5 dB.
hM / LM FReq Rotary Center frequency adjustment for the high-mid and low-mid bands. For both
3-20 Parameters
This view enables the user to control the most important parameters of the EQ
section. The complete parameter set is available on the channel-related EQ
view, refer to chapter 3.4.1. There you will also find all parameter details.
For 5.1 surround channels the equalizer settings are valid for all surround
signal legs except the LFE. For further information on this subject, please
refer to chapter 3.4.1.
All four bands of the EQ section can be activated simultaneously with the
EQ hardware key above the Vistonics
on/off keys described below.
There are two different views for the EQ view; one of them (below left) is
displayed when pressing the EQ hardware key, and the other one (below right)
when pressing  (Shift) before the EQ key.
Standard View:
bands, the center frequency can be adjusted from 20 Hz through 20 kHz, in
120 steps. These controls are visible in the 'shift' view only.
SW V4.5
section, in addition to the individual
™
'Shift' View:
Date printed: 27.0.0