Mix Comparison; Undo/Redo - Studer Vista 9 Operating Instructions Manual

Vista 9 Digital Mixing System
5.5.1.1

mix Comparison

Co­mparing Mix Passes Mix Pass comparisons can be performed in one of two ways:
5.5.1.2

undo/Redo

5- AutoTouch+
becomes active.
• Creating a new Mix Pass: The newly created Mix Pass will be added to
the top of the Mix Pass Stack and becomes active.
• Right-clicking a Mix Pass in the Mix Tree: The Mix Tree Right Click menu
will open. Selecting 'Set As Read Mix' will cause the selected Mix Pass
to be added to the top of the Mix Pass Stack and become active.
Co­nditio­ns The Active Mix Pass cannot be changed while RECORD is engaged.
One of the unique features of AutoTouch+ is the ability to compare Mix
Passes while the mix is running. Any Mix Pass in the Mix Pass Stack can be
accessed at any time, even while a mix is being played back.
• Clicking a Mix Pass in the Mix Pass Stack: The clicked Mix Pass will
become active after a short processing delay. Using this method, passes
in the Mix Pass Stack can be activated in any order.
• UNDO/REDO keys: The UNDO/REDO keys activate adjacent Mix Passes in
the Mix Pass Stack (see below).
Co­nditio­ns Mix comparison is disabled once RECORD has been entered.
No­te A fair amount of processing must take place when switching between Mix
Passes. Due to the time it takes to perform this processing a slight delay is
normal.
UNDO and REDO keys are located in the top row of the Automation Panels.
They allow the user to essentially 'undo' and 'redo' changes as they are made
within the course of a mix. They also provide a method for real-time mix
comparison.
SW V4.5 Date printed: 28.0.0