Global Views; Input Parameters - Studer Vista 9 Operating Instructions Manual

Vista 9 Digital Mixing System
3.3

Global Views

3.3.1

input Parameters

MONO INPUT
IN1 IN2
Parameters
X X
PHASE
– –
XY/MS-MODE
– –
INPUT MODE
X X
INPUT GAIN
3- Parameters
Press GLOBAL VIEW: INPUT GAIN.
For input sources IN 1, IN 2, and GEN (selection with the hardware keys
below the channel meters), an input control view is available. The number of
functions available on Input or Output channels, as well as on mono or stereo
channels, depends on the active configuration.
A DC reject filter is always active in each channel.
For input and output channels, the following parameters are available:
STEREO INPUT
GEN IN1 IN2 GEN IN1
X X X X X
– X X – –
– X X – –
X X X X X
Mono Channel: Stereo Channel:
SW V4.5
MONO GROUP STEREO GROUP
IN2 GEN IN1 IN2
X X X X
– – X X
– – X X
X X X X
MONO/STEREO MONO/STEREO
MASTER
GEN IN1 IN2 GEN IN1
X – – – –
– – – – –
– – – – –
X – – – –
Date printed: 27.0.0
AUX
IN2 GEN
– –
– –
– –
– –