Setting The Order Of Dsp Processing Blocks; On-Screen Toggles For Input Selector And Dynamics Key Selector; Editing The Channel User Labels - Studer Vista 9 Operating Instructions Manual

Vista 9 Digital Mixing System
4.4.3.2

Setting the order of DSP Processing Blocks

4.4.3.3

on-screen Toggles for input Selector and Dynamics Key Selector

Input Selector To toggle the three-way input selector (In1, In2, Gen), click on the switch
Dynamics Key Selector To toggle the two-way input selector (Int, Ext), click on the switch icon that
4.4.3.4

Editing the Channel User labels

4-8 GC Operation
The following processing blocks (provided they have been configured) can
be placed individually at different locations along the Audio Path of each
channel:
• EQ;
• Insert Point;
• Dynamics (Compressor/Limiter/Expander/Gate/Sidechain);
• Delay;
• Fader & ON/OFF Mute.
The actual order of the system blocks is user-modifiable, and can be changed
at any time. The order is saved with Snapshots and Presets.
To change the system-block order, use the familiar drag-and-drop tech-
nique:
• Click on the selected blocks, and hold down the trackball button;
• Available positions in the signal path are shown as a reversed embossed
graphic;
• Drag the selected block to the required position in the signal path;
• If the block can be inserted at that location, the block name will turn
red;
• Release the button and the selected block will be inserted into the new
location.
icon that corresponds to the location at which you want the selector to point.
The Desk Input Selector keys will follow the changes, and display the correct
source.
corresponds to the location at which you want the selector to point.
The selector settings are saved within Snapshots.
Double-click on the User Label field (Usr) to open the Edit window. Proceed
to edit and/or change the Desk Label using the same techniques used in the
General Patch.
SW V4.5 Date printed: 28.0.0