5.22 Gc Automation Menu - Studer Vista 9 Operating Instructions Manual

Lo­cate System o­n Standing Co­de <Never>: AutoTouch+ will never locate to a standing timecode location.
Other Miscellaneo­us Optio­ns <Read Safe>: Normally when a control is moved its changed value is able to be

5.22 GC Automation menu

New Mix Tree Selecting 'New Mix Tree...' from the Automation menu opens the New Mix
Open Mix Tree Selecting 'Open Mix Tree...' from the Automation menu opens the Open
Make/Save Pass Selecting 'Make/Save' from the Automation menu will generate a new Mix
Date printed: 28.0.0
<Always>: AutoTouch+ will always locate to a standing timecode location.
<After>: AutoTouch+ will locate to a standing timecode location after the
time specified by the millisecond pull-down menu.
auditioned, and then it snaps back to the Read Mix value (unless Touch Hold
is active). When this option is set, any controls in READ mode will NOT be
able to be auditioned, they will always follow the read mix value regardless
of the physical or virtual control position
<Disable Trim Replay>: When this option is selected, faders will NOT play
back any recorded Trim data. Note that this has no effect on the mix values
that are being played from the read mix. Only that the faders will not track the
any previous Trim values that were recorded. The Read Mix values already
contain the effects of any previously recorded TRIMs. So this only affects
how the faders respond when they are in TRIM enable mode. Also note that
TRIM replay is only available on faders.
The GC Automation menu contains several items used in the operation of
AutoTouch+. These menu items are referenced throughout this document and
are explained briefly below.
Tree dialog window. A new Mix Tree may be created using this window.
Mix Tree dialog window. An existing Mix Tree may be opened using this
window.
Lo­ad Mix Selecting 'Load Mix...' from the Automation menu opens the Load Mix Into
Tree dialog window. An existing Mix from any Title may be loaded into the
current Mix Tree using this window.
Pass. This is useful when it's desirable to save updated Static values without
having to perform a RECORD pass.
SW V4.5
Vista 9 Digital Mixing System
AutoTouch+ 5-