Write - Studer Vista 9 Operating Instructions Manual

5.6.2

Write

WRITE Rules Reco­rd Off:
Rotary Values
Fader Values
Date printed: 28.0.0
WRITE is the primary data recording mode of the system. Controls in WRITE
ENABLE are armed for recording and those in WRITE RECORD will write
changes to a new Mix Pass.
• WRITE ENABLE: The control acts the same as if it were in READ (replaying
the mix Read data), but is armed to go into WRITE RECORD.
- A new Mix Pass is not generated unless RECORD is engaged.
Reco­rd On:
• WRITE RECORD: The absolute value (level) of the control is written into a
new Mix Pass.
- Read mix values are overwritten.
At the end of a pass in which at least one control was in WRITE RE-
-
CORD, a new Mix Pass is generated based upon the Active Mix Pass
and the newly recorded data.
No­te WRITE RECORD is a destructive mode in regard that previously written data
is overwritten. However, mix data is never lost because a new Mix Pass is
generated at the end of every RECORD pass. All Mix Passes are retained in
the Mix Tree unless purposely deleted.
The Vistonics™ concept allows displaying the current and replay values of
rotary and fader controls in a very clear and comfortable way.
Current and replay value of the rotary control: If the current value is different
from the one within the last mix pass, a pink colored element indicates the
value of the last mix pass, while the main display is indicating the current
value.
Current and replay value of the fader: If the current value is different from
the one in the last mix pass, a pink colored element indicates the value within
the last mix pass, while the main display is indicating the current value.
SW V4.5
Vista 9 Digital Mixing System
AutoTouch+ 5-4