Vista 9 Digital Mixing System
4.4.2.2
How to Deal with the Analog interfacing?
4-22 GC Operation
'Where are the analog interfaces coming in?', you might be asking. We still
need some analog sound. Here is how we achieve that task: The Vista Patch
and DSP systems only know about digital interfacing. Since all analog input
and output cards in the D21m I/O system are equipped with D/A or A/D
converters, respectively, there is basically no difference between analog or
digital inputs/outputs for the DSP.
Inputs
AES/EBU
MADI
TDIF
ADAT
SDI
Targets
Dolby
E/Digital
®
CobraNet
®
Mic/Line (an.)
Line (analog)
Sources
Input Patch
Crosspoints
The only exception are the analog mic/line input cards that require additional
control for gain, phantom power on/off, high-pass filter, etc., and their direct
outputs that are completely separated from any digital I/O signal. The analog
insert card available for the mic/line input card A949.0427 is fully indepen-
dent as well.
SW V4.5
DSP Channels
Input Channels
Group Channels
AUX Channels
Master Channels
Sources
Output Patch
Crosspoints
Outputs
AES/EBU
MADI
TDIF
ADAT
SDI
Aviom A-Net
®
CobraNet
®
Line (analog)
Targets
Date printed: 28.0.0