Channel Patch - Studer Vista 9 Operating Instructions Manual

Vista 9 Digital Mixing System
4.4.3

Channel Patch

4- GC Operation
frame is connected to the console via a serial link. However, when recalling
a snapshot containing the 'non intelligent' fixed labels (e.g. from older pro-
ductions), this will overwrite the fixed labels as well and make the 'intelligent
fixed labels' disappear. In this case, select Regenerate Intelligent Fixed
Labels within the SysAdmin menu and update this snapshot.
The Channel Patch page of the Graphical Controller can be called up in three
different ways:
• From the Page menu, by clicking on the appropriate menu item;
• Using the Page icons, by clicking on the appropriate icon in the toolbar;
• Using the CHAN PATCH function key on the control surface – which is
probably the fastest way.
To quickly switch back from General Patch to Channel Patch page, just click
the right trackball button while the cursor is positioned over the X-Y field in
the General Patch.
As its name implies, the Channel Patch is channel-oriented, which means that
only one channel is displayed at a time.
To select a channel to be displayed in the Channel Patch page:
• Press the LINK/SEL key on the desired Desk Channel Strip, or
• Use the Channel Selector in the Toolbar (refer to chapter 4.2.1).
SW V4.5 Date printed: 28.0.0