Where To Install; How To Install - Studer Vista 9 Operating Instructions Manual

Vista 9 Digital Mixing System
6.1.1 Where to Install
6.1.2 How to Install
Installing from a Compressed File
Check the Installation
Check the Results: Please use the Windows Explorer to check the results of your work now. The
C:\SCoreCfgTool \tmpFiles\(subdirectory) contains temporary files
C:\D950SYSTEMDB \YourCfg\(subdirectory) any previously existing Configurations
Create a Shortcut: Usually the fastest way to use a program is to create a so-called Shortcut on
6- Session Configuration
The Session Configuration Tool may either be installed on the Studer Vista
Control PC, or on any other PC, provided that above requirements are met.
We recommend installation on a PC different than the Vista control PC. The
program requires a lot of processor power while it is compiling. Whilst it
will run without any problem in a multitasking environment with multiple
programs running at the same time, its performance may be considerably
slowed down under such circumstances. If speed is essential, we recommend
running the Session Configuration Tool on a separate PC.
In some cases, the Studer Vista Digital Mixing System may be delivered with
the Session Configuration Tool already installed.
If you have obtained the Session Configuration Tool in compressed form,
you will start by copying the file (usually called
target directory and then running the self-extracting file. This will decompress
the original files and create the necessary directories for you.
You need to extract the original files into a root directory of a drive (C, D,
E, ...) on your PC. Please make sure that the '
placed directly under the root of your selected drive as indicated above, oth-
erwise the Configuration Tool may not work properly.
Now please proceed with the instructions found in the paragraph 'Check the
installation' below.
following (or similar) file structure should now be found on your target PC
(assuming 'C' was selected as the target drive):
\aryymmdd.ach
\CoreFuncyymmdd.lib
\CoreFunc96kyymmdd.lib 96k DSP source code library
\ScoreCfgTool.exe
\mnyymmdd.exe
\rtyymmdd.a
refers to 'year month day' and indicates the version of the file.
'yymmdd'
This version number varies from release to release. Please refer to the release
documentation of your specific release in order to check that the files are cor-
rect.
...
The next step will be to create a Shortcut and then to set several options within
the Configuration Tool.
the Windows Desktop. To create a Shortcut for the Session Configuration
Tool, please click on the file '
then use the right trackball button and drag the file to the desktop. Now you
are ready to run the Configuration Tool for the first time.
SW V.5
ScoreCfgTool.zip
:\ADI_DSP
DSP Proc. Element architecture file
48k DSP source code library
the Session Configuration program
executable used for the core files
DSP RTOS (operating system library)
' in the Windows Explorer,
ScoreCfgTool.exe
) into the
' directory has been
Date printed: 28.10.10