Area 18 - Cue List Keys; Area 19 - Option/Spare Keys - Studer Vista 9 Operating Instructions Manual

Vista 9 Digital Mixing System
2.4.18 Area 18 – Cue List keys
2.4.19 Area 19 – Option/spare keys
2- Desk Operation
CUE: LIST
Opens the cue list on the Graphical Controller.
These keys give direct access to the cue list. They can be used to control
various functions of the cue list and allow certain functions to be switched
using a hardware key. Using the trackball and operating these functions on
the Graphical Controller screen is possible as well.
X FAD
Switches the cross-fade function between cues on/off.
PREVIEW
Activates or deactivates the cue preview mode.
PREV – NEXT
Jumps to the previous or next cue in the list.
To prevent from accidental use, the PREV and NEXT keys are only active if
'Arm Cuelist' is switched on in the graphical controller screen.
The corresponding PREV and NEXT buttons on the screen, however, are always
active.
These keys can be used for different functions. The upper group of option
keys, OPTION F1...F9, currently are assigned as follows:
F1 – Cut MIDI input port; flashes as long as the port is disabled (cut).
F2 – Cut MIDI output port; flashes as long as the port is disabled (cut).
F3 – Toggle Blackout
F4 – For opening/closing the Clipboard Library window
F5 – Update VCA/Mute
F6 – Update Snapshot
The remaining keys (F7...F9) are currently not used.
SW V4.5 Date printed: 27.0.0