Area 4 - Monitoring Source Selector - Studer Vista 9 Operating Instructions Manual

Vista 9 Digital Mixing System
2.4.4 Area 4 – Monitoring source selector
2-20 Desk Operation
SOURCE SELECTOR: CR – STUDIO A – STUDIO B
Determines whether the source selector keys are active for the control room,
for studio A or B.
 SOURCE SELECTOR
Each key can be assigned to two sources: One for the control room, one for
the studio.
Extended Source Selector mode: For the control room, it is possible to activate
the SOURCE SELECTOR top row (keys no. 1...4) to be 'sub-selectors' rather
than selectors, allowing 12 sources to be assigned to each of these keys. This
functionality makes 48 sources available for listening in the control room,
rather than the standard 16. Activation is done by editing the monitoring.ini
file. This may be done by experts only.
Pressing one of the 'sub-selectors' will make one of the 12 sub-sources
selected and audible in the monitoring. Pressing the sub-selector again will
open up a list of all 12 sources available for this sub-selector on the Graphi-
cal Controller screen. Select any of the 12 with the trackball, then close the
dialog by pressing the same sub-selector key again. If none of the 12 sources
is selected, the dialog will pop up automatically upon the first key press in
order to make a selection with the trackball.
SW V4.5 Date printed: 27.0.0