Making And Clearing The Cross-Points - Studer Vista 9 Operating Instructions Manual

Vista 9 Digital Mixing System
4.4.2.4

Making and Clearing the Cross-Points

Mono Source – Mono Target
4-24 GC Operation
The creation and updating of cross-points is simple. First, select the Source
and Target; the Selection Bars have to be crossed to form an X-Y pair.
There are two ways of making or breaking a cross-point connection:
• By double-clicking the left trackball button, while the cursor is positioned
over the crossed Selection Bars, or
• By using the function keys on the control surface keyboard;
Using the MAKE CONNECT (make connection) function key will always make
a default connection, depending on the Source- and Target-type combination.
Using the CLEAR CONNECT (clear connection) function key will always clear
any cross-point connection. (This is the fastest method to make or clear a
connection.)
Double-clicking the left track ball button: This method is more sophisticated,
because it allows you to select from a number of connection options displayed
in a pop-up menu box. The menu display depends upon the combination of
Source (mono or stereo) and Target (mono or stereo). The uppermost con-
nection type in the menu is the default connection type, which is applied if
you use the function keys, as shown above.
SW V4.5
Empty Box: No Connection
Mono-Mono Connection
Clear Connection
Date printed: 28.0.0