Scene Capture/Recall - Studer Vista 9 Operating Instructions Manual

Digital mixing system, sw v4.5
Table of Contents

Advertisement

5.14.5

Scene Capture/Recall

Scene Capture Holding the STORE key and pressing CAPT will 'capture' a Scene in the first
Scene Recall Pressing the RCL key will 'recall' the Scene stored in the first buffer. Hold-
Clearing a Scene Buffer Holding the Global Record CLR / ALL key and pressing CLR / ALL and RCL
Date printed: 28.0.0
A Scene is a global 'snapshot' of the automation status of each control within
the system. There are two buffers in which Scenes may be stored. Scenes will
be stored and can recalled during subsequent sessions.
No­te The term 'snapshot' is not the same as a Snapshot in the GC. Snapshot in
this regard refers to a picture of the automation status console-wide.
buffer. Holding the AUTO MODE and STORE keys and pressing AUTO MODE
and CAPT will 'capture' a Scene in the second buffer.
The RCL key will illuminate when a Scene has been captured in the first buf-
fer. There is no indication of the status of the second Scene buffer.
The following controls will be stored within a Scene:
• Controls in RECORD
• Controls that are Held
• Controls that are being touched when the Scene is captured
A list of controls and their values will be stored when a Scene is cap-
tured.
No­te If no controls are in the states listed above, the existing Scene buffer will
remain intact.
ing AUTO MODE modifier key and pressing the RCL key will recall the Scene
stored in the second buffer.
When a Scene is recalled, the controls on the list come back Held and
WRITE Enabled. The values for the controls in the buffer will be reinstated
as well. If Touch Record is active, the controls in the list will punch-in to
RECORD upon Scene Recall
will 'clear' a Scene in the first buffer. Holding Global Record CLR / ALL and
AUTO MODE and pressing RCL will clear the second Scene buffer.
No­te The data in the Scene Buffer is not saved as part of a Mix Pass, Mix Tree, or
Title. Therefore, it will not persist from session to session.
SW V4.5
Vista 9 Digital Mixing System
AutoTouch+ 5-0

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents