5.16.2.4 Channel/O­bject Tree Display Area - Studer Vista 9 Operating Instructions Manual

5.16.2.4 Channel/o­bject Tree Display Area
Date printed: 28.0.0
All channels and objects may be displayed in a tree format. This provides the
means to select specific channels and/or objects on an individual, subset, or
global basis. This display area is located to the right of the Object Selector
Panel and will be blank if both trees are hidden.
To view the Channel Tree, click the 'Show Channels>>' button located
under the Channel Selector Panel. All the channels included in the VMC,
along with their User Labels, will be contained in the tree (left part of the
picture below).
To view the Object Tree, click the 'Show Objects>>' button. All objects
included in the configuration will be included within the tree. Only one tree
can be displayed at any one time (right part of the picture below).
Once a tree has been chosen, all of the individual elements it contains
may be viewed by opening the displayed folders and folders within folders
(click the '+' icons to open folders and the '–' icons to close them). Like
the channel/object selectors, only elements contained within the VMC are
displayed.
Items can be selected for editing by checking any combination of folders
and/or individual elements within the tree. Using this method, an exact set
of elements, either simple or complex, can be chosen. Because of this high
SW V4.5
Vista 9 Digital Mixing System
AutoTouch+ 5-9