Ofla Editing - Studer Vista 9 Operating Instructions Manual

Vista 9 Digital Mixing System
Perfo­rm an Event List Edit To perform an Event List edit, use the following procedure:
5.16.2 o­FLA Editing
Accessing OFLA OFLA is available by selecting 'Edit Mix Pass' from the GC Automation
5-2 AutoTouch+
1. Make the Mix Pass to be edited the Active Pass if it is not already.
2. Select 'Event List Editor' from the GC Automation menu. The Event
List Editor window will open.
3. Click the 'Edit List Filter' button to open the Object Picker for the Event
List Filter. Using this picker will allow Events for the desired controls
on selected channels to be chosen for editing. Once selected, click either
the 'Apply' button (if more edits will be performed) or the 'OK' button
(if no more objects need to be selected). Events for the controls in the
picker will be selected for editing and will appear in the Event column
of the Event List Editor window.
4. Click the desired edit operation. If moving or copying Events and/or
Event Lists, enter the new timecode location and click 'OK'. The selected
edit will be performed.
5. A new Mix Pass is written that contains the edited values.
AutoTouch+ data may be edited using the OFLA offline mix editor. OFLA is
stand alone mix editor that may be used with or without AutoTouch+. Being
fully integrated with AutoTouch+, OFLA provides quick and easy compre-
hensive Mix Pass editing when used in a session environment. When used in
an offline capacity OFLA is equally efficient.
OFLA allows the values of automation records to be edited within a timecode
window. Objects can also be made Static using OFLA.
menu.
This action will open the Event List Editor window:
SW V4.5 Date printed: 28.0.0