Editing The User Labels In The General Patch - Studer Vista 9 Operating Instructions Manual

Connection Protection:
4.4.2.5

Editing the User labels in the General Patch

Date printed: 28.0.0
It is also possible to protect a certain connection from accidental change both
by the user or by recalling a snapshot.
Double-clicking on a connection selects the padlock item to lock the connec-
tion. To unlock, double-click again.
Both the background of the Target as well as the connection become red.
When attempting to change a protected connection, a warning appears, toge-
ther with the instructions on how to unprotect the connection.
In order to edit the User Labels in the General Patch view, first click on the
desired Source or Target in the Sources/Targets list. Both the User and Fixed
Labels for the selected Source or Target will be shown in the Label Fields at
the bottom of the screen:
Click on the User Label Field of the Source or Target. This will open a dialog
box that allows editing a User Label, such as changing it from 'Inp m 1 In1'
to 'Snare':
To automatically move to the next Source/Target in the list, either click on
'Next' or hit ENTER on the keyboard. To close the dialog box click on 'OK'.
It is possible to choose a Source/Target from the General Patch list without
closing the Edit User Label dialog box. Simply click on the desired Source/
Target from the General Patch list with the window still open. This will auto-
matically enter it into the window for editing.
A click on 'Reset' will restore the 'Inp m 1 In1' default user label.
User Labels with up to 13 characters (depending on the width of the individual
characters) can be used for Digital Input sources.
SW V4.5
Vista 9 Digital Mixing System
GC Operation 4-2