5.13.1.3 Loading Protection Sets - Studer Vista 9 Operating Instructions Manual

Vista 9 Digital Mixing System

5.13.1.3 Loading Protection Sets

5-98 AutoTouch+
To make a Protection Set the current set, it must be Loaded unless it was the
last set used or saved.
Using the following procedure, previously created Protection Sets may be
loaded:
1. Click the 'Mix Protection Enabled' button to open the 'Automation Pro-
tection' window if it is not already open.
2. Click the 'Load...' button and a selection box containing the available
Protection Sets will be displayed. The current Protection Set will be dis-
played at the bottom of the box in the 'Current Protection Set:' field. The
current set will also be shown in blue in the Protection Set list. All others
will be in black.
3. Double-click the desired Protection Set or click it and 'Load'. The se-
lected set will become the current set and the selection box will close.
No­te Protection Sets cannot be loaded from other Titles. Protection Sets made
within a Title are only available to that Title. Protection Sets made within a
Title are available to all Mix Passes within that Title.
SW V4.5 Date printed: 28.0.0