Snapshot Crossfading - Studer Vista 9 Operating Instructions Manual

Vista 9 Digital Mixing System
4.4.4.3

Snapshot Crossfading

4-48 GC Operation
It is possible to define a crossfade time for each Snapshot. This is done by
simply clicking on the crossfade time and scroll your trackball up or down.
If the crossfade feature is deactivated (see below), it is impossible to adjust
the crossfade time.
The Snapshot crossfading may be deactivated by deselecting the Xfade Active
option on the Snapshot Screen.
Settings that cannot be crossfaded (switches) can either switch at the begin-
ning, in the middle of the crossfade or after the crossfade. This behavior
can be defined in the Snapshot Automation Options window selected from
the Options menu. There, it is also possible to define a Default Crossfade
Time.
For an explanation of the Enable Trim Mode option, refer
4.4.4.7.
SW V4.5
to chapter
Date printed: 28.0.0