Channel Patch - Studer Vista 9 Operating Instructions Manual

5.11.2

Channel Patch

Date printed: 28.0.0
There are several items within the Channel Patch that may be automated.
These items may be stored as Static objects or recorded as Dynamic ob-
jects.
The following Channel Patch items may be automated:
• Input Selector: Changes to the selected channel input may be automated
(In1, In2, Gen)
• Processor Block Order: Changes to the order of the channel processor
blocks may be automated (EQ, Dynamics, Insert, Delay, and Fader)
• Dynamic Sidechain Link Setup: The addition of channels to the Dynamic
Sidechain Link Setup may be automated
• Dynamic Sidechain Link Enable: The 'Enable Sidechain Link' button may
be automated (Enable/Disable)
• Dynamic Key Input Routing: The selection of the Dynamic unit Key Input
may be automated (Channel/External)
• Direct Output Tap Location: The location from where the channel Direct
Output is fed may be automated (Post Input, Pre Fader, Post Fader)
• Meter Feed Tap Location: The location from where the channel Meter is
fed may be automated (Post Input, Post Fader, Direct Out Assignment)
No­tes Like any other object within AutoTouch+, all Channel Patch items are Static
objects until a change state is recorded in the system. Therefore, Channel
SW V4.5
Vista 9 Digital Mixing System
AutoTouch+ 5-8