Control Room Dim Level Adjustment; Studio Dim Level Adjustment - Studer Vista 9 Operating Instructions Manual

Vista 9 Digital Mixing System
Config Dump: This action will create a copy of the current Monitor Configuration file and
Reinitialize: This action will reinitialize the monitor system and reload the last used Moni-
Test Command: This menu item is only used in the factory for testing the communication
4.7.5.1

Control Room DiM level Adjustment

4.7.5.2

Studio DiM level Adjustment

4-44 GC Operation
place it in the
D950SYSTEM
and is useful for troubleshooting. In this status this file is not
FiGDUMP.DaT
executable since it does not have a
all the parameter settings and other information.
tor Configuration file. The monitors will mute during this operation.
between the work-surface, the control PC, and the monitoring racks.
Hold the DIM key next to the control room level rotary. After a short while
you will see the current DIM level on the level display. Turn the dB SPL CR
level control to adjust the dimming level, and then release the DIM key.
Hold the DIM key next to the studio monitor LEVEL rotary for two seconds.
Turn the LEVEL rotary control to adjust the dimming level and release the
DIM key. The current dimming level is displayed with the LED ring around
the LEVEL control.
SW V4.5
directory. The copied file will be named
extension. However, it does contain
*.ini
MONCON-
Date printed: 28.0.0