Hold - Studer Vista 9 Operating Instructions Manual

Vista 9 Digital Mixing System
5.21.4

Hold

Held Plays Mix <Disable While Touched>: When HELD PLAYS MIX on the AutoTouch+ Panel
Clear Held Objects <When Touch Hold Turned Off>: TOUCH HOLD (on the AutoTouch+ Panel)
5-5 AutoTouch+
is active channels that are Held, do not 'play' their held auditioned values, but
play the Read Mix values instead. When this option is set, touching a control
at this time disables this feature and allows a new audition (punch) value to
be established by being able to listen to the Audition audio. If this option is
unchecked, the Held Plays Mix function is not over-ridden and the Read Mix
continues to be heard.
may be turned on and off during the course of a Mix pass. This options affects
whether Held controls are cleared of their 'held' status when The Touch Hold
mode is changed from On (active) to Off. If the option is not selected, then
changing the state of Touch Hold will have no effect on Held controls.
<Upon Punch Out>: Touch Hold is used for a variety of purposes. Sometime
a write value needs to be held (so that un-touching the control while Touch
Record is engaged does not punch it out of record), just until the control is
punched out of record. At that point the control would return to playing back
the Read Mix. With this option set, that is how the behavior would work.
However, sometimes you will want to punch-in to that same held value later
in the mix pass, even after you have punched out for this section of the mix.
By deselecting this option the behavior will allow for this operation. The held
value will remain until it is cancelled by other means. The new Mix Pass will,
of course, not be affected.
SW V4.5 Date printed: 28.0.0