3.3.1 Bridge Card Ip Address Setting; 3.3.2 Bridge Card Ip Address Recovery - Studer Vista 9 Operating Instructions Manual

SCore Live
3.3.1 Bridge Card IP address setting
3.3.2 Bridge Card IP address recovery
8 SCore Live
Each Bridge card within the network must have its own, unique IP address.
• Connect your computer to the OnAir 3000 network and login to the Bridge
card's web interface using a web browser (http://192.160.1.60/).
The default IP address of the primary port is 192.168.1.60, of the second-
ary port 192.168.2.60.
• Select 'core management', password: 'studer'.
• Select 'View/Change IP addresses configuration'.
For OnAir3000 consoles, the IP address of Ethernet port 1 is usually set
according to the following rules:
IP address = 192.168.SID.15
Subnet mask = 255.255.0.0
where SID is the system ID derived from the core's serial number. The Bridge
card in a core with the serial no. 2077 shall then have the static IP address
192.168.77.15.
Note The IP address of the first network adapter must not be within the same subnet
as the IP address of the second port.
• Click on 'Apply settings at next startup'.
The following steps allow to find out the Bridge card's IP address:
1 The Bridge card must be started in in 'Safe Boot Mode'. Therefore, switch 1
must be ON and the card must be restarted. It will then start with IP address
192.168.1.38. In order to avoid an IP conflict in the network, the Bridge card
may be disconnected from the network.
2 Connect to port 1 of the Bridge card using FTP.
IP address = 192.168.1.38
User name = root
Password = Obelix
3 The shell script file folder 'setup_network.sh in the fs0p0/bin/' contains the IP
addresses of Ethernet port 1 (en0) and port 2 (en1) as used in normal mode:
#!/bin/sh
#######################################################
## Primary interface
#######################################################
#----- Fixed IP -----
ifconfig en0 192.168.1.60 alias
#######################################################
## Secondary interface
#######################################################
#----- Fixed IP -----
ifconfig en1 192.168.2.60 alias
The settings may be changed here.
4 Download the modified file and restart the Bridge card in normal mode (i.e.
switch 1 = OFF).
Date printed: 28.0.0