Miscellaneous - Studer Vista 9 Operating Instructions Manual

Vista 9 Digital Mixing System
5.21.7

miscellaneous

Pro­tect Static <When Stopped>: Changes to Static objects will be ignored unless the system
Mo­dified Un-to­uch Inverts <Touch Record>: The AUTO MODE key acts as a modifier key for certain
5-0 AutoTouch+
This option page contains options not addressed elsewhere.
is 'Mixing' (timecode running or stop frame mode).
<For Protected Controls>: When a control is protected (out of scope) changes
to the control will not be stored as Static values. They can be auditioned and
will return to their stored value when a new Mix Pass is started.
<For Non-Automated Controls>: Changes to Non-Automated objects (like
Pan Format) will not be stored as Static values. They can be auditioned and
will return to their stored value when a new Mix Pass is started.
<From Kill Pass>: Stored Static values are not affected by Kill Pass opera-
tions.
functions. For example, if the modifier key is held when an enabled control
is touched, the control will or won't go into record based on the inverse of the
setting of the Touch Record function (of the AutoTouch+ Panel). Normally,
when this radio button is selected, when un-touching a control, if the modifier
key is held, the Touch Record functionality is again reversed.
<Touch Hold>: By selecting this option, when un-touching a control, the ef-
fect of Touch Hold is reversed rather than that of Touch Record.
SW V4.5 Date printed: 28.0.0