5.16.3.2 Spread Source Mix - Studer Vista 9 Operating Instructions Manual

Vista 9 Digital Mixing System

5.16.3.2 Spread Source mix

Mix Selectio­n Menu This pop-up menu box provides a list of mixes available to become the Spread
Timeco­de Entry Field For a Spread Edit to be performed, a Data Point (a single timecode address)
Offset Co­ntro­ls An Offset combo box is provided for easy control of offsets between the Ac-
Down Arrow
5-24 AutoTouch+
The Spread Source Mix allows external mix data from a single point in time
(Data Point) to be applied to the Active Mix. The data from the selected point
in an external mix (Spread Source Mix) is applied to the selected objects, on
the selected channels, in the Active Mix during the Edit Region.
The Spread Source Mix combo box has two primary control sets:
• Mix Selection Menu: used to select the Spread Source Mix;
• Timecode Entry Fields: used to select the Data Point from the Spread
Source Mix.
In addition, an Offset combo box is provided, so that the Active Mix and the
Spread Source Mix In Times can be easily offset from each other.
Source Mix. This list contains the same mixes available to the Active Mix and
functions using the same selection techniques.
No­te The Spread Source Mix is typically different from the Active Mix. However,
it can also be the same mix as the Active Mix.
must be selected from within the Spread Source Mix.
The Data Point is defined using a Timecode Entry Field. The Spread Source
Mix has one Timecode Entry Field:
Point from which the Spread Source Mix data originates, i.e. the timecode
In Time
address of the Data Point.
The In Time from the Spread Source Mix is selected using the same techniques
used for selecting the Active Mix timecode addresses.
No­tes The In Time selects the Data Point (a specific frame) from the Spread Source
Mix. This fixed data is applied throughout the entire Edit Region in the Active
Mix.
Refer to chapter 5.16.4 for additional details regarding timecode entries.
tive and Spread Source Mix In Times.
The Offset combo box for the Spread Source Mix contains the following
controls:
Moves the Active Mix In Time to the Spread Source Mix In Time;
Moves the Spread Source Mix In Time to the Active Mix In Time;
Up Arrow
+/– Box Toggles the Offset Value between positive (+) and negative (–); '+' is the
SW V4.5 Date printed: 28.0.0