Edit Types - Studer Vista 9 Operating Instructions Manual

Vista 9 Digital Mixing System
5.16.6

Edit Types

General Info­rmatio­n In order to provide power and versatility, OFLA offers seven distinct Edit
Update Snap
At Out Time Controls are provided that determine what happens to the data (for the
Restore Values
Write To End
Write To Next Change
5-4 AutoTouch+
Parameters of similar type may be selected from similar types of objects. For
example, ON/OFF parameters may be selected from Filters, EQ, Dynamics,
Delay, and other objects that contain ON/OFF switches. However, parameters
that are dissimilar may not be chosen for Set and Trim Edit Types.
No­te When incompatible parameters are selected (such as Fader level and Mute),
Set and Trim Edit Types are not functional and values cannot be entered. This
is indicated by a 'Grayed Out' Value Entry Field.
Types. Each provides an edit function designed to perform a specific task.
Edit Types can be chosen by clicking the arrow at the end of the display. A
list of Edit Types will be displayed. Clicking one of the Edit Types will select
it for use. Edit Types can also be selected using click-drag method in the Edit
Type window.
Edit Types are as follows:
Set Parameters selected for editing will be set to the entered value for the duration
of the Edit Region;
Data for the parameters selected for editing will be offset by the entered value
Trim
for the duration of the Edit Region;
Freeze Data for the parameters selected for editing will be frozen at the In Time for
the duration of the Edit Region;
Clear Data from the VMC Defaults will be applied to the parameters selected for
editing for the duration of the Edit Region;
Spread Data from a single point in an external mix will be applied to the parameters
selected for editing for the duration of the Edit Region;
Merge Data from a region of an external mix will be applied to the parameters se-
lected for editing for the duration of the Edit Region;
Data from a single point in an external mix will be applied to the parameters
selected for editing for the entire mix. This is a function corresponding to
'Update Mix Snapshot' in the System Mix Options menu.
parameters selected for editing) that exists after the Edit Region. These radio
buttons are contained in the 'At Out Time' section of the Edit Type combo
box. Only one of these options may be selected.
The functions of these controls are as follows:
The data from the Active Mix that exists after the Edit Region is retained.
The data from the last frame of the Edit Region is written to the end of the
mix.
The data from the last frame of the Edit Region is written for each selected
parameter until there is an original value change for that parameter in the
Active Mix.
SW V4.5 Date printed: 28.0.0