Building Cues - Studer Vista 9 Operating Instructions Manual

Vista 9 Digital Mixing System
4.4.5.3.2

Building Cues

Creating Actors Since the library events are sorted in the channel settings library by actor
Creating Cues This is the next step. It is usually done according to the script. The best way
4-4 GC Operation
Cues can be built on the Virtual Vista. When the rehearsals begin at a later
stage, the title needs to be transferred to the 'real' console. Depending on the
time available, cues may, of course, be built on the 'real' console directly. In
both cases the goal is having audio as soon as it is needed for the first rehears-
als.
names, consider entering their real names, if they are already available at this
stage. Having all the names already entered in the library ready to use and to
save settings with it would be a good preparatory step. It may also be done
later, however.
to do this is creating and naming all cues used for the play.
In the process, the Cue Make and Cue Renumber functionalities can be
used in order to build and update the cue list until it is complete. This phase
may last throughout several rehearsal stages.
Tip In order to be able later to make efficient use of library events, it is recom-
mended that the first cue of a show has a snapshot attached, making sure
that the console is in a 100% defined state at the beginning of the show. This
would be the 'basic settings' snapshot created during console setup.
Since the library and the VCA/mute events are completely separate from
snapshots, the console's basic settings remain static for all channels for which
SW V4.5 Date printed: 28.0.0