Detailed Tutorial; Set Your Own Workspace - Studer Vista 9 Operating Instructions Manual

6.4

Detailed Tutorial

6.4.1

Set Your own Workspace

Channel/Bus
View to
Work on
Date printed: 28.0.0
The previous chapter gives a brief run through all the basics needed to con-
figure a Studer Vista console. We recommend reading it before you proceed
with the detailed tutorial, found in this chapter.
The Session Configuration Tool supports multiple windows. Up to now, a
single view Window was used to operate the Configuration Tool functions.
For a better overview of the configuration process, we recommend using
two windows at the same time – the Channel/Bus page alternatively with the
Interface page, and the Core page in addition. This allows following the rough
estimation of the core requirements on-line, as you edit channels, buses and
interfaces.
Minimized
Interface
View
The last used Workspace setup will be stored when you close the Session Con-
figuration Tool, and will be recalled the next time you start the program.
SW V4.5
Vista 9 Digital Mixing System
Core View
to Check
Statistics
Session Configuration 6-2