The Option Menu; Option: Meter / Generator - Studer Vista 9 Operating Instructions Manual

4.6.4

The option Menu

4.6.4.1

option: Meter / Generator

Metering / Meter Position This action globally sets the metering signal source for all the channels of
Date printed: 28.0.0
The Option Menu is used to set up various operating modes, preferences,
and options. It consists of several items, some of which may not be available
if the appropriate Vista option is not installed. Items in the upper part will
generally bring up a screen for selection of settings and operating modes; the
lower part contains items that can be directly checked from the menu.
The Meter/Generator page is used for adjusting various settings of the desk
channel strip metering and test generator. Generator defaults are automatically
saved in the
D950system\shutdown.pfc
the last used defaults are available after the next start of your system.
the same type to the same point within the signal path. It is usual to set the
Input Channel and Monitor Channel meter sources to Input and those of the
Group, AUX and Master Channels to the Post-Fader position. However, meter
positions may be changed on a channel-by-channel basis and saved with
Snapshots and Presets.
SW V4.5
Vista 9 Digital Mixing System
file when quitting the system, so that
GC Operation 4-0