Area 7 - Talkback / Headphones Control - Studer Vista 9 Operating Instructions Manual

Vista 9 Digital Mixing System
2.4.7 Area 7 – Talkback / Headphones Control
H eadphones Control (upper part): PFL/SOLO – CR – STUDIO
2-24 Desk Operation
 TALKBACK
Whenever TALK is pressed, the signal from the internal talkback microphone
socket is fed to the corresponding group.
Note: The talkback signal is inserted directly before the output interface of the
core. If signals are routed internally to some other destinations, the talkback
will not harm them.
Available talk destinations:
• AUX: direct outputs of all AUX masters
• GRP: direct outputs of all group masters
• MAST: direct outputs of all masters
• STUDIO: talkback to both Studio A and B simultaneously
• BUS: outputs of all multi-track buses (without faders in
between)
• DIR: direct outputs of all input channels.
 AUX 1...4 STEREO
For talking to headphone mixes, these keys can be used to
directly activate talkback to the corresponding AUX master
outputs.
 EXT 1 – EXT 2
Talk to external locations (analog). For details refer to the
block diagram on the next page.
Talkback Return Level
Level setting for external speakers.
If the SEND LEVEL key above the knob is active, the knob
adjusts the input sensitivity of the internal talkback micro-
phone socket instead of the TB return level.
Source selector for the headphones output.
MUTE
Mutes the headphones output.
LEVEL
Level control for the headphones output.
SW V4.5 Date printed: 27.0.0