3.4.3.3
multi-Format Panning Parameters
General PAN on/off is selected with the PAN hardware key above the Vistonics
LFe on/off On/off control for the Low Frequency Effects channel.
LFe LeVeL Rotary LFE level control from MUTE (i.e. –∞ dB) to +10 dB.
FRonT L-R Rotary This parameter controls the front panning between the left, (left-center, center,
ReaR L-R Rotary This parameter controls panning between the left and right surround chan-
Date printed: 27.0.0
Surround panning consists of two panning algorithms: Multi-format panning,
and VSP (Virtual Surround Panning). These support a variety of surround
formats and applications; in all these modes, an LFE (Low Frequency Effects)
control is available. Multi-format panning functions can be configured only
for mono channel types.
Please note that the view below shows 5.1 panning format; for other panning
formats, one or more of the fields may be blanked.
Within this section, no filtering is applied to the signal fed to the LFE bus.
right-center), and right channels in 1° steps. The contribution to the center
channel is determined by the CENTER rotary control.
F-R Rotary This front/rear parameter provides panning between front channels (LCR)
and the rear channels (left and right surround) in 60 increments.
nels.
SW V4.5
Vista 9 Digital Mixing System
™
section.
Parameters 3-39