Auto­to­uch+ Dynamic Auto­matio­n; Getting Started Quickly; Basics - Studer Vista 9 Operating Instructions Manual

5 AuTo­To­uCH+ DynAmiC AuTo­mATio­n
5.1

Getting Started Quickly

Fo­r Beginners We recommend to reset the automation system to the factory default settings.
System Start with AutoTouch+ In order to start your Vista system with the dynamic automation active, double-
5.1.1

Basics

Definitio­ns:
'Held' Objects This is an object being touched with a finger (or an object after being un-
Timeco­de
Date printed: 28.0.0
This short introduction to the AutoTouch+ Automation is meant to give the
user an easy entry point in order to start working with the dynamic automa-
tion. For simplicity some facts are not totally accurate and may have excep-
tions. Also it is possible to modify the behavior of AutoTouch+ automation
very much by varying option settings. In order to get a detailed overview of
all available functions, please refer to chapters 5.2 and up.
This is done by exiting the Vista application and deleting the
D950Ofla.mop
default settings applied.
click on the 'Vista x.x dynamic' icon.
No­te Static (i.e. snapshot) and dynamic automation cannot be used at the same
time.
The operation is based on the individual channel strip as well as on the Auto-
Touch+ panel that is located in the control bay.
Objects An 'object' in the context of the AutoTouch+ automation is any channel
parameter, such as a fader, a key (for e.g. switching an EQ on and off), or a
knob (for adjustment of anything like gain, etc.).
touched, but with the un-touch suppressed by a special mode). Held objects
are indicated by underlined values and displayed fader values in dB.
Vista 9 utilizes MIDI timecode. For synchronization to LTC, an external
third-party converter such as the one in the picture below is required.
SW V4.5
file. After restarting the application, you have the factory

LTC Master
(DAW / Tape
Recorder)
Vista 9 Digital Mixing System
C:\D950system\

MTC Slave
(Vista 9)
AutoTouch+ 5-5